Low Freq |
N/A 2000 MHz |
High Freq |
N/A 28000 MHz |
Gain |
N/A 15 dB |
NF |
N/A 2 dB |
P1dB |
N/A 16 dBm |
IP3 |
N/A 26 dBm |
Bias Instruction |
N/A
Power-up Sequence
1. Set +VIN to 5.5V 2. Set CTL to desired value (Optional) 4. Apply the RF input signal Power-down Sequence 1. Remove the RF input signal 2. Set CTL to 0V 3. Set +VIN to 0V Note: CTL = VGG2 = Open; When using VGG2, it is recommended to limit VGG2 from −2 V to +2.6 V |
