XM-A342-0804C-01
XR-A342-0804C-01 RoHS

Amplifier, HMC797APM5E [PCB: 0844]
Included Bias Controller: XM-A378-0804D
Connectorized Housing
SuperSMA Connectors
Configurations
                    Unit of Measure
                    
               
        
            
                                                                                Product Page | 
                                                                        N/A ADI | 
                                                                                Spec Sheet | 
                                                                        
                                                                            
                                                                                    
                                                                                        N/A
                                                                                        HMC797APM5E  | 
                                                    
                                                                                Low Freq | 
                                                                        N/A 50 MHz | 
                                                                                High Freq | 
                                                                        N/A 22000 MHz | 
                                                                                Gain | 
                                                                        N/A 15 dB | 
                                                                                NF | 
                                                                        N/A 3.5 dB | 
                                                                                P1dB | 
                                                                        N/A 29 dBm | 
                                                                                IP3 | 
                                                                        N/A 41 dBm | 
                                                                                Bias Instruction | 
                                                                        
                                                                            
                                                                                    
                                                                                        N/A
                                                                                        Power-up Sequence
 1. Apply +VIN = +11.5V Typ [+11.5 to +12V] 2. Apply RF input signal Power-down Sequence 1. Turn off the RF input signal 2. Set +VIN to 0V Theory of Operation The input voltage is regulated to provide VDD = +10V to the RF amplifier. VG2 = +3.5V. A negative gate voltage is generated internally starting at VGG = -2V. Vgg becomes less negative until an IDD of 400mA is achieved. IDD is actively maintained by continuously adjusting VGG during operation. The nominal gate voltage is -0.55V.  | 
                                                    
                                                                                RoHS | 
                                                                        N/A XR-A342-0804C-01 |